bedroom storage · boca raton · closet systems · modular closets · sobe furniture · walk-in closet ·

Planning a Closet Wall With Seven In-Stock Modules in Boca Raton

By Frank Chacin, Managing Director at SoBe Furniture

The closet is where a Boca Raton move stalls. The sofa is in, the bed is made, and the primary closet still has one rod and one wire shelf from the builder. Everything that does not fit on that rod goes into bins, the bins go into the guest room, and the guest room stays a storage room for months. We see it in new homes in Lotus and Boca Bridges, oceanfront condos in Highland Beach, and renovated houses off Palmetto Park Road.

The usual fix is a fully custom closet, and we build those. But custom means a measure, a design, an approval and a build, and the honest timeline from approval to installation is six to ten weeks. In South Florida that wait has a cost beyond patience: clothing stored in bins in a garage or a humid spare room picks up the damp, and leather, silk and structured jackets do not forgive that.

That is why we now stock a luxury modular closet system at our Boca Raton showroom. Seven modules, all 91 inches tall, in widths from 10 to 44.5 inches, that combine into a reach-in, a full walk-in wall or an L-shaped closet. They are on the floor at 6599 N Federal Highway and in our Florida warehouse, and they deliver in days. Here is how to plan a wall with them, with real widths, so you can walk in with measurements and leave with a closet on the calendar.

Modular closet hanging unit with drawers, 40 inches wide, from the in-stock luxury modular closet system at SoBe Furniture in Boca Raton

The Seven Modules In Stock Right Now

Everything below is in our in-stock closet collection. Every module is 91 inches tall and 24.5 inches deep (the corner unit is 43.5 inches deep), so they line up flush in any combination. The only variable you are solving for is width.

Modular Closet Hanging Unit with Trouser Rack (V3) in a light gray finish, open view with shelves, hanging rod and pull-out rack

The Five Rules That Decide a Modular Closet Wall

Rule 1: Measure the wall, not the closet

Take three numbers: clear width wall to wall at the back, clear depth from the back wall to the inside face of the door frame, and clear height to the ceiling or the underside of any crown molding or soffit. Note obstructions: electrical boxes, an AC return, the door swing. Bring those numbers in. A wall with them takes minutes to solve on the showroom floor. A wall described from memory takes a second visit.

Rule 2: Hanging first, then towers to fill

The 40 inch hanging units are the backbone of every wall. Decide how many fit first, then use the 20, 14 and 10 inch towers to land the exact width. Start with hanging, finish with towers, and the arithmetic almost always closes within an inch or two.

Rule 3: Count what you own before you pick the hanging units

The three 40 inch modules look alike and behave differently. If most of your wardrobe hangs, the plain unit (V5-V6) gives you the most hanging rod. If the closet should replace a dresser, the drawers unit (V1) does that. If you own a dozen pairs of trousers that crease when folded, the trouser rack (V3) earns its spot. Most primary closets work best with two different hanging units, and the drawers and the rack are exactly the things to open and try on the showroom floor before deciding.

Rule 4: A corner needs a corner unit

Two straight modules meeting in a corner leave a 24.5 inch square dead spot in the corner, either an empty pocket you cannot reach or one module's side blocking the other's front. The corner unit (C43) runs 44.5 inches along one wall and 43.5 along the other, so it occupies the corner and makes it usable. Place it first, subtract its width from each wall, and plan the rest with Rule 2.

Rule 5: Respect the ceiling and the door

At 91 inches tall, the modules clear a standard 8 foot ceiling, which is 96 inches, with 5 inches to spare. What they do not clear is a soffit at 88 inches or crown molding projecting into the top of the wall. On a reach-in, confirm the doors still open with 24.5 inches of module behind them. If the closet is a true 24 inches deep, the modules sit about half an inch proud of the jamb, and that is a conversation for the desk before you buy.

Three Closet Walls We Plan Most Often

The reach-in closet: 70 to 94 inches

The classic Boca reach-in is 6 feet wide, or 72 inches. One hanging unit with drawers (V1) at 40 inches, a 20 inch tower and a 10 inch tower total 70, leaving an inch each side, with hanging, drawers and a shoe column where a single rod once was. An 8 foot reach-in at 96 inches takes two hanging units plus a 14 inch tower, for 94 inches, a full his-and-hers reach-in.

The 10 foot walk-in wall: 120 inches exactly

Three 40 inch hanging units make 120 inches on the nose: drawers (V1) at one end, trouser rack (V3) in the middle and the plain unit (V5-V6) at the other, so one run handles folded pieces, trousers and long hang. On a 12 foot wall, the same three units plus a 14 inch tower and a 10 inch tower land on 144 inches exactly.

The L-shaped walk-in: 10 feet by 8 feet

Place the corner unit (C43) first. Along the 120 inch wall it takes 44.5 inches, leaving 75.5: a hanging unit with drawers (V1) at 40, a 20 inch tower and a 10 inch tower total 70, for 114.5 inches filled. Along the 96 inch wall it takes 43.5 inches, leaving 52.5: a trouser rack unit (V3) at 40 and a 10 inch tower total 50, for 93.5 inches filled. Six modules, both walls, the corner working, nothing built to order.

In-Stock Modular vs Custom Built-In, Honestly

We sell both, so there is no reason for me to oversell either one.

The modular system wins on time, certainty and price against fully custom millwork. The modules are in stock in Boca Raton, every price is on the page, and the closet is delivered in days. It is furniture, so it moves with you, and you can add a tower later. The tradeoff is fixed widths, a fixed 24.5 inch depth, and no island, no integrated lighting and no fitting to a sloped ceiling or odd angle. On most straight walls and square corners none of that matters, and a three-module 10 foot wall lands under $10,000.

A custom closet wins when the room does not cooperate or you want things furniture cannot do. Angled walls, a window mid-run, a dressing room with an island and vanity, felt-lined jewelry drawers, motion-activated lighting, a lacquer color matched to the bedroom: that is custom work, it starts with a free in-home measure, and it takes six to ten weeks after approval. A media wall or built-in office is our custom wall units path.

They also combine well: modular walls in the guest and kids' closets the week you move in, then a custom primary suite on its own timeline.

Condo, New Construction or Established Home

Condos in Boca Raton and Highland Beach

Condo closets on the oceanfront and around Mizner Park tend to be straight reach-ins or small square walk-ins with 8 foot ceilings, and the building sets the delivery rules: freight elevator windows, certificates of insurance, no weekend deliveries in some towers. A modular wall suits that. Nothing is cut on site, and delivery is a scheduled appointment rather than weeks of construction past the front desk. Bring your building's requirements and we plan around them.

New construction in Lotus, Boca Bridges and Parkland

Builder closets in new communities are generous in size and minimal in fit-out: a rod, a shelf, sometimes wire. Ceilings are often 9 or 10 feet and the walls are square, so Rule 2 comes out cleanly. Measure at the final walk-through, visit the showroom before closing, and have the modules deliver the week you get keys.

Established homes in Royal Palm, Delray Beach and Boynton Beach

Older homes have the most variety: wire or laminate systems that have to come out, deeper closets from earlier eras, the occasional soffit eating into the wall. This is where photos help. Send them ahead through our contact page with your measurements, and the layout goes faster when you arrive.

Delivery and Setup Across South Florida

The modules are stocked in Florida, and delivery is white-glove: they come into the room and are set in place, not left in boxes at the curb. We deliver across Boca Raton, Delray Beach, Highland Beach, Boynton Beach, Parkland and Fort Lauderdale, and you schedule delivery at the desk when you choose the modules, so you leave with a date, not a lead time. What white-glove service includes is on our delivery page, and financing is available; see our financing page. Empty the closet before delivery day, and if an old system is coming out, ask us about it when you schedule.

Plan Your Closet Wall at the Boca Raton Showroom

The modules are on the floor at SoBe Furniture, 6599 N Federal Highway in Boca Raton, on US-1 just north of Mizner Park. Open the drawers, pull the trouser rack, see the finish in real light and stand beside a 91 inch tower to judge the scale for your room. Bring the three numbers from Rule 1 and a photo of the closet, and we will design the wall with you, price it module by module and put delivery on the calendar before you leave. We are open seven days a week, Monday through Saturday 10 AM to 7 PM and Sunday 11 AM to 6 PM. Call (561) 221-6111, send measurements and photos ahead through our contact page, or browse the in-stock closet collection first.

Frequently Asked Questions

Where can I see modular closet systems in person in Boca Raton?

At the SoBe Furniture showroom, 6599 N Federal Highway in Boca Raton, on US-1 north of Mizner Park. The hanging units, shelf towers and corner unit are on the floor, and we are open seven days a week. Bring your closet measurements and we will lay out the wall with you on the spot.

How quickly can a modular closet be delivered in Boca Raton or Delray Beach?

The modules are in stock in Florida, so delivery is scheduled in days rather than weeks, and you pick the date at the desk. White-glove delivery covers Boca Raton, Delray Beach, Highland Beach, Boynton Beach, Parkland and Fort Lauderdale.

How many modules do I need for a 10 foot closet wall?

Three 40 inch hanging units make exactly 120 inches. For a 12 foot wall, add a 14 inch and a 10 inch shelf tower to reach 144. Most people mix the hanging units: one with drawers, one with a trouser rack, one plain.

Will the modules fit under a standard 8 foot ceiling?

Yes. Every module is 91 inches tall and an 8 foot ceiling is 96 inches, leaving 5 inches to spare. Check for crown molding or a soffit inside the closet and bring that height with you.

Is a modular closet system better than a custom closet?

They solve different problems. Modular is in stock, priced per module and delivered in days, with fixed widths and no islands or lighting. Custom is built to the inch over six to ten weeks and handles angles, windows, islands and lighting. We offer both and will tell you honestly which fits your room.

Can I add modules later?

Yes. Every module shares the same height and depth, so a tower or hanging unit added later lines up with what you own. Many start with one wall and add the corner unit or a second wall later.

Back to Furniture Design Blog