Specifying Custom Wall Units, Closets and Window Treatments for a Client: A Designer's Guide in Boca Raton
By Thais Monteiro, Brazilian Lifestyle and Warm Modern Design Contributor at SoBe Furniture
Loose furniture is rarely what keeps a designer up at night. A sofa can be swapped and a rug reordered. The trouble lives in the pieces attached to the architecture: the media wall that has to land exactly between two windows, the closet that has to clear a door swing, the motorized shade that needs power in a pocket nobody framed. Specify those loosely and the problems show up on install day, in front of the client.
In South Florida the margin gets thinner. A Fort Lauderdale or Highland Beach high-rise has elevator reservations and association rules. A new build in Lotus or Boca Bridges may still be changing while you draw. An established home in Palm Beach or Parkland has walls rarely as square as the plans suggest. Each condition changes how a wall unit, closet or window treatment should be specified.
This guide is for interior designers and architects who want to hand off built-in work with confidence: what to bring, what to specify, how the process runs at SoBe Furniture in Boca Raton, and where the trade program fits.
How Custom Work Moves From the Showroom to the Client's Wall
Custom wall units at SoBe follow a clear sequence: planned at the showroom, measured at the home, built to the measured opening and installed by SoBe's own team. Your drawings start the conversation, but the build follows the field measurement, which protects you when the finished wall differs from the plan by an inch or two.
Pricing is by quote only, because no two openings, finishes or lighting plans are alike. See design directions and the full process on our custom wall units in Boca Raton page, and browse compositions in the custom wall units collection.
For designers and architects, the SoBe trade program is the starting point. You apply with a short form, the team reviews it and replies by phone or email, then asks for a W-9 (plus a resale or design license number if you have one, which is optional). Trade pricing is project pricing: confirmed once your account is verified and dependent on the scope of the project. Trade members can source in the showroom or from the website.
The Six Specifications That Decide Whether a Wall Unit Works
Most wall unit problems trace back to one of six details. Settle these before the showroom meeting and the planning session becomes about design rather than discovery.
1. The opening dimensions
Measure width at the floor, mid-height and near the ceiling, and note any difference. Mark windows, door casings, returns and soffits that touch the wall. The build follows SoBe's measurement at the home, but your numbers shape the first design.
2. Ceiling height and what lives above it
A floor-to-ceiling composition reads very differently at 9 feet than at 10 or 12. Note crown molding, recessed lights, beams and HVAC returns. In many condos, a dropped soffit changes what can run full height.
3. Power, AV and low-voltage locations
Mark every electrical box, data line, cable drop and HDMI conduit on the elevation. Note the TV size and mounting height, where the soundbar or speakers sit, and whether equipment needs ventilated storage. A box that has to move later is the most avoidable mistake in custom work.
4. The material palette
SoBe custom wall units can be planned in walnut, oak, white lacquer, stone and porcelain, alone or in combination. Warm woods like walnut bring the grounded, sensual quality I love in Brazilian modern interiors, while white lacquer keeps a coastal condo light and quiet. Stone and porcelain slabs add weight behind a television or fireplace. The Granada stone and walnut niche wall unit and the Tribeca wall unit in white lacquer with LED show how far apart those two moods can sit.
5. Integrated LED lighting
Integrated LED lighting turns niches and shelves into a soft evening glow, but it must be planned with the power plan. Decide which shelves glow, whether stone is backlit, and how the lights are switched.
6. A linear fireplace, or not
Linear fireplace options can anchor the composition, and the Marquise fireplace wall unit in dark walnut shows how a fireplace and warm wood can share one wall. If a fireplace is in play, confirm the unit type, required spacing to surrounding materials and power or venting needs with your contractor before the planning session.
Custom Closets and the Bedroom Around Them
For designers specifying custom closets in Boca Raton, the process is simple to explain to a client: the space is measured at the home, the closet is designed and built to order, and a written quote follows the in-home measure. Details live on the custom closets page.
Before the measure, gather the client's wardrobe profile: long hanging versus double hanging, shoe count and display, drawers for jewelry and watches, a valet rod or an island. Note the door swing, light switch, any window and any attic access panel in the ceiling.
When the room calls for something more standardized, the modular closet modules stand 91 inches tall and carry listed prices in the closets collection. Shelf towers, hanging units and corner units suit a guest suite or secondary bedroom.
XL family beds for family homes
Family homes in Parkland, Weston and west Boca Raton often bring a request designers do not see every day: a bed large enough for parents and children together. SoBe offers XL family beds at 120 inches wide (two Queens) and 152 inches wide (two Kings). Lead time is 10 to 14 weeks, with 4 to 6 weeks expedited on select models, and a 50% deposit. At these widths, specify the bed before the closet and shades are finalized.
Motorized Shades and Window Treatments Across Palm Beach County
SoBe offers custom motorized shades, drapery, Roman shades, plantation shutters, blinds and solar shades, all measured at the home, made to each opening and professionally installed across Palm Beach, Broward and Miami-Dade. You can review the range on the window treatments page.
For motorized shades installation in Palm Beach County, the questions to answer early are about power and pockets. Will the shades be hardwired or battery powered? Is there a recessed pocket in the ceiling, or will a fascia cover the roller? On an oceanfront unit in Highland Beach or Palm Beach, solar shades protect floors and upholstery while keeping the view. In a bedroom, a blackout shade behind drapery gives darkness and softness. Note every mounting surface and nearby obstruction, such as a wall unit or headboard, so treatments and built-ins never fight for the same inches.
Condo, New Construction or Established Home: How the Specification Changes
Condos and high-rises
In a Fort Lauderdale tower, a Highland Beach oceanfront building or a residence near Mizner Park, the building shapes the project. Expect concrete walls and ceilings, which limit where new power can go, and confirm what the association allows before designing anything that touches the structure.
New construction
In communities like Lotus and Boca Bridges, the advantage is timing. If you are engaged before drywall, you can place power, AV conduit, blocking and shade pockets exactly where the wall unit and treatments need them. Plans change during construction, which is why measuring the finished opening protects the build.
Established homes and model homes
An older home in Delray Beach, Palm Beach or West Palm Beach brings walls that are out of plumb, floors that slope and windows replaced at different times. Build in scribe allowances and expect the measured opening to differ from the original plans. For a model home, the priorities shift toward a polished first impression and a clean install schedule, so lock finishes early and coordinate the install around the builder's calendar.
Delivery, Building Paperwork and Install Day
SoBe's own white-glove team delivers, places, assembles and removes packaging across Palm Beach, Broward and Miami-Dade, from Boca Raton and Delray Beach to Weston and West Palm Beach. In-stock furniture is typically delivered within 5 to 10 business days in a three-hour delivery window. Delivery is never included; within the three counties it is the greater of $120 or 3% of the merchandise total, and outside them it is quoted separately. The full terms are in the shipping policy.
There is no surcharge for high-rise, gated-community or island addresses inside the local area. For buildings, give SoBe the building or association contact, and the team handles the COI, gate pass, elevator reservation and approvals. Allow time for the COI, especially when the building requires special wording. Sequence painters, electricians and shade installation so the client sees one finished room.
Bring the Drawings to the Showroom Before You Specify
Renderings flatten everything, and scale and finish are hard to judge on a screen. In the showroom you can stand among several hundred pieces on display, plan the wall unit with the team and confirm proportions before a client signs off. Seeing furniture at true size makes it far easier to decide how deep a niche should be or how tall a composition can run.
Bring the floor plan, elevations, ceiling heights, power and AV locations and photos of each wall. Bring the client too: walking them through the plan in person settles questions quickly. Not every product on the website is on the floor, so call ahead to check a specific piece or finish, and book an appointment if you want a one-on-one design consultation.
SoBe Furniture has served South Florida since 2007 and has furnished and designed thousands of homes. Visit us at 6599 N Federal Highway in Boca Raton, on the west side of Federal Highway about a mile north of Yamato Road. Call (561) 221-6111 or contact the showroom to set a time. We are open seven days a week: Monday through Saturday 10 AM to 7 PM and Sunday 11 AM to 6 PM. If you have not joined yet, apply to the trade program before your first project meeting so your account is verified when you start sourcing.
Frequently Asked Questions
What should a designer bring to specify a custom wall unit?
Bring the floor plan, wall elevations with opening width and ceiling height, and the locations of power, AV and low-voltage lines. Add the TV size, any fireplace plans, the desired materials and photos of the wall. The final build follows a measurement taken at the home.
Where can I find custom wall units for designers in Boca Raton?
SoBe Furniture plans custom wall units at its showroom at 6599 N Federal Highway in Boca Raton, then measures at the home, builds to the measured opening and installs with its own team. Options include walnut, oak, white lacquer, stone, porcelain, integrated LED lighting and linear fireplace options. Pricing is by quote.
How do custom closets work for a Boca Raton design project?
The closet is measured at the home, designed and built to order, and a written quote follows the in-home measure. For simpler rooms, 91 inch modular closet modules with listed prices are another route.
Who installs motorized shades in Palm Beach County?
SoBe Furniture offers motorized shades along with drapery, Roman shades, plantation shutters, blinds and solar shades. Each is measured at the home, made to the opening and professionally installed across Palm Beach, Broward and Miami-Dade counties.
How does a furniture trade program work for designers in Boca Raton?
At SoBe, trade pricing is project pricing. It is confirmed once your trade account is verified and depends on the scope of the project. Apply through the short form on the SoBe trade program page, and the team will follow up by phone or email.
Who handles the COI and elevator booking for furniture delivery in a Fort Lauderdale high-rise?
SoBe's delivery team handles the COI, gate pass, elevator reservation and approvals once you share the building or association contact. Allow time for the COI, especially if special wording is required. There is no surcharge for high-rise addresses inside the local delivery area.
What sizes do XL family beds come in and how long do they take?
SoBe XL family beds come in 120 inches wide, equal to two Queens, and 152 inches wide, equal to two Kings. Lead time is 10 to 14 weeks, with 4 to 6 weeks expedited on select models, and a 50% deposit is required.